Neither a usb cable plugged into the pioneer board or a cy8ckit-049-42xx board plugged directly into the usb port will connect. I get usb power to the device. I hear audio feedback when they are plugged into the usb port but the device manager does not show any cypress device plugged in.
I have de-installed/re-installed the USB-to-UART bridge. I have removed the entire Cypress packages and re-install them, including the USB-to-UART bridge with the problem persisting. I plugged in other USB-to-UART microprocessors (st.com Nucleo board and micro-bit) and they work and do download new code to the microprocessors.
Last weekend I received an automatic Windows 10 update that required a reboot. Prior to that event I was able to program and debug PSOC devices. When I use PSOC creator to download code there are No devices listed.
Can you please download the USB-Serial Windows Driver Installer from the link:http://www.cypress.com/documentation/software-and-drivers/usb-serial-software-development-kit and install the drivers. Then plug the device