PROGRAMMING AND DEBUG INTERFACE

[Anonymous]

Hi, I have designed a PCB board with CYBLE-214009 module and need to program and debug the module with SWD interface.Two pins are assigned for programming and debuging P0[7] (SCLK)and P0[6](SDAT) respectively on board. I am not able to program the module on custom pcb board. I am using PSOC MINIPROG3 PROGRAM AND DEBUG KIT. 
Pins assigned in BLE module with MINIPROG3 PROGRAM AND DEBUG KIT:- 
1 - VDD 
2- GND 
3- XRES 
4- SCLK P0[7] 
5- SDAT P0[6]

[Anonymous]

Hi, I have designed a PCB board with CYBLE-214009 module and need to program and debug the module with SWD interface.Two pins are assigned for programming and debuging P0[7] (SCLK)and P0[6](SDAT) respectively on board. I am not able to program the module on custom pcb board. I am using PSOC MINIPROG3 PROGRAM AND DEBUG KIT. 
Pins assigned in BLE module with MINIPROG3 PROGRAM AND DEBUG KIT:- 
1 - VDD 
2- GND 
3- XRES 
4- SCLK P0[7] 
5- SDAT P0[6]

[himam_31 · Accepted solution]

Hello,

   

Please have a look at http://www.cypress.com/knowledge-base-article/troubleshooting-psoc-345lp-programmingdebugging-issues...

   

Thanks,

   

Hima