2 Replies Latest reply on Feb 11, 2017 8:32 AM by BoTa_264741

    How to clear RX FIFO NOT EMPTY INTERRUPT IN PSoc4000s controllers

    user_1902111

      I am doing following steps for clearing Rx interrupt

         

       

         

      1. Attach the interrupt component to the pin on the SCB in the schematic

         

      2. Create an ISR in your code by using the CY_ISR() macro

         

      3. Start the ISR by running the interrupt_StartEx()

         

      4. In the ISR you need to clear the interrupt source.. .this point i dont know which function is doing this

         

      please help me to resolve this.