- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi ,
Its unclear from the datasheet for the BCM20732S, which pin is the RTS pin ?.
I see that CTS is pin 30 and in older datasheets RTS was pin 25.
Does a UART RTS pin exist for the BCM20732S.
Thanks
Mark
Solved! Go to Solution.
- Tags:
- bcm20732s rts pin
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Upon doing some research internally on the subject of flow control, it appears that flow control is not available via the PUART on the module. This is why the RTS pin no longer appears as a GPIO option in the datasheet.
Please accept our apologies for the confustion.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I agree that this is confusing as the datasheet states that P25/P1 is tied to the WP pin of the embedded EEPROM.
However, the WICED Smart Hardware Interfaces document seems to imply that P1 is available for the Optional RTS function: WICED™ Smart Hardware Interfaces
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Upon doing some research internally on the subject of flow control, it appears that flow control is not available via the PUART on the module. This is why the RTS pin no longer appears as a GPIO option in the datasheet.
Please accept our apologies for the confustion.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thank you for clarifying, vey much appreciated, Mark
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
No problem. Let us know if you run into any other trouble.