- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I have BLE pioneer kit , which has only 5 buttons but I like to test the functionality of my application using more than 12 CapSense buttons (CSD for the moment). I read all or most of cypress CapSense documents but never found a document introducing simpler way to build them on bread board than just building them on PCB. is it possible and how?
Solved! Go to Solution.
- Labels:
-
BLE
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thanks for your brilliant idea!
I happened to try just with a push pin on bread board. And.... It works well!
Like the picture I connected blue wire from the push pin to CapSense pin [3.0] and yellow wire to GND in BLE pioneer kit with the code examples CE210291 in PSOC creator.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
You may be able to make them with Copper tape and a copper screen for the ground plane. I have never tried it but is may work.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I successfully used conductive ink on two layers of overhead foil to draw buttons and ground plane.
Bob
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thanks for your brilliant idea!
I happened to try just with a push pin on bread board. And.... It works well!
Like the picture I connected blue wire from the push pin to CapSense pin [3.0] and yellow wire to GND in BLE pioneer kit with the code examples CE210291 in PSOC creator.