Scanning problem on CYBLE-022001-00

[Anonymous]

Hello

   

I'm having a very strange problem with scanning for advertising devices

   

I modified the Observer project (Day 10 )for my hardware

   

While I;m 100% certain that there are devices advertising, ( CySmart sees them  the CYBLE_EVT_GAPC_SCAN_PROGRESS_RESULT event never fires!

   

And the strangest thing is  that it was working yesterday!.

   

I was at a different location but other than that nothing is different. 

   

Project is attached. It's just a sample from the 100 series - I only disabled the low power mode stuff and the UART

   

Any ideas? I'm at my wit's end

   

One thing that appears strange to me

   

In the file BLE_eventHandler.c in the case CYBLE_EVT_GAPC_SCAN_PROGRESS_RESULT the code only executes when  CYBLE_CPS_CLIENT is defined. It is not defined for this project . Any details on that ?

   

Thank you

   

Andy

[Anonymous · Accepted solution]

Never mind.. operator error. In the other location the distance between the tags was over 3 meters and there were some metal obstacles.

[Anonymous]

Welp; Glad we could help you out 😉

[Anonymous]

Thanks 🙂

   

I still have an outstanding issue not related to this,  that I'm struggling with

   

Would appreciate some help

   

http://www.cypress.com/forum/proc-ble/piezo-beeper-setup?page=1

   

Thanks

   

Andy