- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I noticed that the spec sheet did not have a landing pattern. What does cypress officially recommend for the BGA package using pads? as well as filled vias?
Solved! Go to Solution.
- Labels:
-
BLE
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Page 42 of the same document shows the ball size: 0.260+- 0.03
It also lists the dimensions/specifications of the 76-BGA WLCSP package.
It also lists: Reference JEDEC publication 95, Design Guide 4.18
I don't see any references to vias explicitly.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Indeed, i have seen that. It does not however talk about landing patterns for the BGA. For example pad size in mils or via and drill size in mils. If cypress had an example design that would also help. I am not aware of any. The general rule of thumb is 17% smaller pads than ball diameter however I have no idea for vias.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Page 42 of the same document shows the ball size: 0.260+- 0.03
It also lists the dimensions/specifications of the 76-BGA WLCSP package.
It also lists: Reference JEDEC publication 95, Design Guide 4.18
I don't see any references to vias explicitly.