If your project is working with other chips means it should work with CYBLE-022001-00 as well.
Please test with another CYBLE-022001-00 module if you have.
Check all the pins are selecetd correctly.
Try setting ECO cap trim value as in the following KBA http://www.cypress.com/knowledge-base-article/eco-capacitance-trim-values-ez-ble-modules-kba218990
If nothing is working, share your project. We shall test it at our side.
It was just some grounding issues that I overlooked. The projects are working with the CYBLE-022001-00.
The project is already working with the CYBLE-022001-00. The issue was not the capacitor trim value nor the module itself.
Thank you so much.