1 of 1 people found this helpful
CYW2073x supports multiple peripheral connections and also simultaneous slave/master role.
Please refer to the following blog post for simultaneous slave/master.
Regarding multiple peripherals, simultaneous connections will alway be time-shared. There is limited bandwidth available to a network and this is shared between pairs of devices at a time. If you have 1 master with n slaves, the master will poll each slave and the slave can respond only to the master when polled. The interval and instant when the poll happens is established when the connection between the master and that slave is established.
Thanks for your feedback! Please correct me if my understanding in my scenario corrects:
Process: Central C connect/poll peripheral A, TX,disconnect A, connect peripheral B, TX, disconnect
When we says simultaneous, there is only single active connection between Master and one of the slave at any incident?
assume 3 bytes of data payload from central to peripheral, what will be the estimated time latency range between peripheral A received payload and peripheral B received Payload from Central C?
Thanks and Regards,