- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Support team !
We're working on a device imx6 with a bcm4330 chip. We're trying use it with a freescale 3.14.52 kernel. We got a working driver for 3.0.35 kernel but we would like to use a more recent version. Here are my questions regarding the driver:
- Is 141.88 bcmdhd driver compatible with this chip ?
- Is there any documentation we can use to configure the driver Makefile for this chip ?
Thanks
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The BCM4330 is not one of the devices we support in the broad market, so it is not therefore supported here on the IoT Community.
Please reach out to your local/regional Cypress/Distribution contacts that enabled you with this device as they will need to line up direct factory support (if available).
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The BCM4330 is not one of the devices we support in the broad market, so it is not therefore supported here on the IoT Community.
Please reach out to your local/regional Cypress/Distribution contacts that enabled you with this device as they will need to line up direct factory support (if available).