bcm20736 connect issue

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Anonymous
Not applicable

Hi all,

we use 20736 to connect sensor, sometimes it disconnected quickly with reason 0x3E when connected, what is the '0x3E' means, after that we did a retry to connect, but unfortunately sometimes can work, sometimes not work, still disconnect. we want to know what is reason will cause.

[10/19/16 10:50:23:236] BTOP: Start Connect(3 1 2 4C55CC142E95)
[10/19/16 10:50:23:231] BLE: -->Rev(6) (F1 01 00 E1 01 03)
[10/19/16 10:50:23:227] BLE: F1 S0 Cmd Success
[10/19/16 10:50:23:224] BLE: E1 scan result(3-High Scan) req(0 0) total(0 2)
[10/19/16 10:50:23:220] BLE: -->Rev(15) (E1 01 00 E4 09 00)
[10/19/16 10:50:23:216] BLE: E1 scan result(0-NO Scan) req(0 0) total(0 2)
[10/19/16 10:50:23:212] BLE: E4 CONNECTED(4C55CC142E95)TP(0)HD(0x41)Role(0)
[10/19/16 10:50:23:207] BLE: MATCH CONNECTED
[10/19/16 10:50:23:114] BLE: -->Rev(5) (E5 03 41 00 3E 00)
[10/19/16 10:50:23:110] BLE: E5 DISCONNECTED:HD(0x41) Reason(0x3E)

Thanks,

Lei

0 Likes
1 Solution
BoonT_56
Employee
Employee
500 likes received 250 likes received 100 likes received

I referred to the core specs 4.2 for a list of the error codes.

0x3e means that the link layer has initiated a connection but the connection failed to be established.

View solution in original post

1 Reply
BoonT_56
Employee
Employee
500 likes received 250 likes received 100 likes received

I referred to the core specs 4.2 for a list of the error codes.

0x3e means that the link layer has initiated a connection but the connection failed to be established.