Adaptivity Threshold

[YuSu_2202696]

In bcm43455 FW, I would like to adjust threshold of Adaptivity active, transmission stop by this level.

Current parameter is below

eu_edthresh2g=-65

eu_edthresh5g=-65

This information is descrived in nvram_ap6255.txt, at /mnt/mtd.

These value are only avalilable -75 to lower, -75dBm MAX.

If I set threshold value is -65dBm by "eu_edthresh2g=-65", adaptivity active level is still -75dBm.

Could somene instruct how to adjust threshold AND are there any other parameter to enable threshold?

Thank you

[MichaelF_56]

Re: How to disable Adaptivity function in bcm43455?

Per the other three posts on the same/similar subject, please reach out to USI.

jone

I will also ask the Linux team in-house if there is any non platform specific guidance they can provide in this area: seyhan​ vsb​

[YuSu_2202696]

Thank you!!

I really need guidance to be available adaptivity threshold parameter.

[YuSu_2202696 · Accepted solution]

I got proper parameter, thanks!