How to use adc_readVoltage?

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Anonymous
Not applicable

I'm using BRCM20737S and adc_readVoltage to read some measure which is output byvoltage. But, in some BRCM 207373S,  adc_readVoltage outs a wrong value, sometime. Pleasetell me how to use adc_readVoltage to read right value constantly?

0 Likes
1 Solution
MichaelF_56
Moderator
Moderator
Moderator
250 sign-ins 25 comments on blog 10 comments on blog

Have you seen the example provided in the WICED™ Smart Hardware Interfaces AppNote?

There is an entire category of threads dedicated to the ADC as well.

Go here: WICED Smart Forums and click on the "ADC" category listed there in the left-hand side.

In addition, the following threads have been helpful to others as well:

Re: BCM20732S ADC Configuration

Questions related to the ADC implementation on the BCM2073XS...

View solution in original post

6 Replies
Anonymous
Not applicable

Hi tnarahara,

Have you taken a look at WICED™ Smart Hardware Interfaces, page 27 has sample code.

-Kevin

MichaelF_56
Moderator
Moderator
Moderator
250 sign-ins 25 comments on blog 10 comments on blog

Have you seen the example provided in the WICED™ Smart Hardware Interfaces AppNote?

There is an entire category of threads dedicated to the ADC as well.

Go here: WICED Smart Forums and click on the "ADC" category listed there in the left-hand side.

In addition, the following threads have been helpful to others as well:

Re: BCM20732S ADC Configuration

Questions related to the ADC implementation on the BCM2073XS...

Did you have a chance to go through those threads?

dmiya

tnarahara

Anonymous
Not applicable

Sorry to leave this non-active. I'd like to close this question. Could you tell me hoe to close?

0 Likes

The thread has been marked correct, so it is technically closed.  If you have follow on questions, please create a new thread and then reference this one.

0 Likes
Anonymous
Not applicable

Thanks!

0 Likes