Hi,
We are using Broadcom 43362 module. We have only one Internal Antenna on module and no Auxiliary antenna is connected to module.
We are initializing the Wi-Fi 43362 module successfully, then we are setting Antenna to Antenna_1, Antenna_2 and Antenna_Auto using wwd_wifi_select_antenna() API. But in case of setting Antenna_2, even though there is no auxiliary antenna connected to module wwd_wifi_select_antenna() API returns success and Wi-Fi module successfully get provisioned as STATION mode and also received IP address to Wi-Fi module.
We have following question on this:
1. Our expectation is that, if there is no Auxiliary Antenna, then setting Antenna_2 should failed, shouldn't it?
2. We are setting Antenna after initilization of Wi-Fi module using wwd_wifi_select_antenna(), do we have to any configuration before setting Antenna value?
Please point us any test application or Document if any.
Thanks & Regards,
Santosh Itkare
