- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
HI Everyone,
I am in trouble. I am currently using PSOC CY8C6137-BZI. I have finalized my schematic and have used gpio 0.0 and 0.1 (Port 0 pin 0 & 1) which now psoc creator says is reserved. Is there anyway through which I can provide permanent high to those pins??? As that will solve my problem.
Please let me know any workaround.
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi KeSh_1984591,
I'm assuming the part number is CY8C6137-BZI-F54. I'm using PSoC Creator 4.3 and I'm able to assign digital output pins to P0.0 and P0.1.
Check if you have enabled WCO in the clocks configurator. If WCO is enabled, then P0.0 and P0.1 are reserved pins and should be connected to an external WCO crystal. They can not be used as a GPIO. Please confirm.
If this doesn't solve your issue, please share the project to debug the issue further.
Regards,
Bragadeesh
Bragadeesh
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi KeSh_1984591,
I'm assuming the part number is CY8C6137-BZI-F54. I'm using PSoC Creator 4.3 and I'm able to assign digital output pins to P0.0 and P0.1.
Check if you have enabled WCO in the clocks configurator. If WCO is enabled, then P0.0 and P0.1 are reserved pins and should be connected to an external WCO crystal. They can not be used as a GPIO. Please confirm.
If this doesn't solve your issue, please share the project to debug the issue further.
Regards,
Bragadeesh
Bragadeesh
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thanks a lot, this worked.
Actually I new to PSOC6 and so I had no idea regarding this.
Thanks again.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Awesome! Thank you for your interest with our products. Happy exploring
Bragadeesh