- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
dear sir/madam,
when we are loading program to cybt-343026 module by using wicked mod programmer after loading 50 modules it is not working.
can any one give the solution.
this is urgent for us please help me.
thanks,
harikrishna
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Are you configured to automatically program the devices one by one? If yes, how many devices are you programming in a row?
Is your programming consistently failing at 50th module everytime?
Could you please use a different cybt-343026 module and and try programming.
Please make sure that the you have selected the correct bad rate (115200) with flow control enabled in the configurationof DUT.
Is it possible for you to try programming the failing device using chipload (Click here), so that we can narrow down the issue.
WICED Module Programmer User Guide – KBA225060
Thanks,
-Dheeraj
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello HaGo_4718696 ,
Can you please clarify what exactly is the issue ?
After programming 50 modules, the GUI is showing some error? If then what is the error ?
Please give more details.
Regards,
Anjana
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
while loading firmware it is failing
the log data:
04-11-2020 12:15:48.937: LogManager: Started
04-11-2020 12:15:49.589: WICEDModuleProg: Module Family: CYW20707_SFlash
04-11-2020 12:15:49.627: WICEDModuleProg: Module Family: CYW20707_SFlash
04-11-2020 12:15:49.647: WICEDModuleProg: Programming Board: UART Adapter Board
04-11-2020 12:15:49.647: WICEDModuleProg: Initialization complete
04-11-2020 12:15:49.692: ProgramManager: NewConfig1 - program created.
04-11-2020 12:15:49.694: WICEDModuleProg: Default test program created.
04-11-2020 12:15:49.794: PortSetDlg[40]COM3DUT: Connected to "COM3 - WICED HCI UART (COM3)" (115200, RequestToSend)
04-11-2020 12:16:38.224: ProgramManager: Selecting_DUT 1/8
04-11-2020 12:16:39.598: Prog[0]COM3 : Reset (COM3) Timeout!
04-11-2020 12:16:39.602: Prog[0]COM3 : Soft-Reset Fail COM3
04-11-2020 12:16:39.605: Prog[0]COM3 : Failed to reset on baudrate = 115200
04-11-2020 12:16:39.610: Prog[0]COM3 : Failed to reset DUT
04-11-2020 12:16:39.625: ProgramManager: ---->SetResult [1,1] = TestFailed
04-11-2020 12:16:39.671: ProgramManager: Selecting_DUT 2/8
04-11-2020 12:16:39.702: ProgramManager: Selecting_DUT 3/8
04-11-2020 12:16:39.732: ProgramManager: Selecting_DUT 4/8
04-11-2020 12:16:39.762: ProgramManager: Selecting_DUT 5/8
04-11-2020 12:16:39.792: ProgramManager: Selecting_DUT 6/8
04-11-2020 12:16:39.820: ProgramManager: Selecting_DUT 7/8
04-11-2020 12:16:39.849: ProgramManager: Selecting_DUT 8/8
04-11-2020 12:16:39.990: WICEDModuleProg: Test program stopped.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Are you configured to automatically program the devices one by one? If yes, how many devices are you programming in a row?
Is your programming consistently failing at 50th module everytime?
Could you please use a different cybt-343026 module and and try programming.
Please make sure that the you have selected the correct bad rate (115200) with flow control enabled in the configurationof DUT.
Is it possible for you to try programming the failing device using chipload (Click here), so that we can narrow down the issue.
WICED Module Programmer User Guide – KBA225060
Thanks,
-Dheeraj