- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
I'm just wondering if there is a general error in the PSoC 4200 Family Datasheet with the power supply diagramms. https://www.cypress.com/file/138656/download
On pages 16 and 17, all the pins are only connected to Vss (or Ground)... This should be corrected.
Philipp
Solved! Go to Solution.
- Labels:
-
PSoC 4 Architecture
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Philipp,
If you watch close only the VSS pins are directly connected to ground. Other power supply pins (VDDD,VCCD,VDDA) are grounded through bypass capacitors. The images are showing the recommended decoupling capacitors to be used. You can check hardware design guide form more details.
Best Regards,
Vasanth
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Philipp,
If you watch close only the VSS pins are directly connected to ground. Other power supply pins (VDDD,VCCD,VDDA) are grounded through bypass capacitors. The images are showing the recommended decoupling capacitors to be used. You can check hardware design guide form more details.
Best Regards,
Vasanth
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
hm, ok, right answer. but strange, that vdd are not shown there too... thx any way.