GPIF admux master mode

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
xizh_4727211
Level 1
Level 1

Hi,

   I am using the FX3 and trying to transfer data from FX3 to FPGA by GPIF port. The FX3 is working in master mode with 16bit ADMux.

    I don't know how to write "Address" in my State Machine,because I can't find DR_ADDR item in Action list. Do we have any example about GPIF 16bit ADMux master mode?

   Please help. Thanks.

0 Likes
1 Solution
YiZ_31
Moderator
Moderator
Moderator
1000 replies posted 750 replies posted 500 replies posted

Hi,

If you want to design a new GPIF state machine, you can set the adddress pins here:

pastedImage_0.png

Then you can finkd DR_ADDR in the action List.

Check AN87216 for more details.


Regards,
Eddie

View solution in original post

0 Likes
1 Reply
YiZ_31
Moderator
Moderator
Moderator
1000 replies posted 750 replies posted 500 replies posted

Hi,

If you want to design a new GPIF state machine, you can set the adddress pins here:

pastedImage_0.png

Then you can finkd DR_ADDR in the action List.

Check AN87216 for more details.


Regards,
Eddie

0 Likes