- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
hello...
in context to .PDF File, we are looking to have small dimension device and its radio range is not longer than 2 mt.
can anybody suggest: which parameter is associated with the range and since we will not be in need of 50 mt+ usable range; what can the D,G, H, S,L,W value (as prescribed in page 21) can be made compromised and shrink...?
thanks in advance...
Solved! Go to Solution.
- Labels:
-
PCBLayout
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
In order of worsening RF performance - L, W, S, H
Keep in mind that none of the RF parameters in the datasheet would be valid as you shrink there, and you will have to determine your compromise based on trial and error.
L, S and H are recommended not to shrink below 0.5mm and W not below 1mm
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
In order of worsening RF performance - L, W, S, H
Keep in mind that none of the RF parameters in the datasheet would be valid as you shrink there, and you will have to determine your compromise based on trial and error.
L, S and H are recommended not to shrink below 0.5mm and W not below 1mm