Using the CY7C65211A in SPI mode Virtual COM Port

[JaMa_3208951]

Can the CYUSBS234 DVK have the CY7C65211 swapped out with the A version to be configured in SPI mode as a virtual COM port? If so will the configuration utility allow the SPI configuration?

[YatheeshD_36 · Accepted solution]

Hello,

Yes the USB-Serial 'A' parts are pin compatible with the 'non-A' parts and can be swapped on the DVKs.

CY7C65211 can be swapped with the CY7C65211A part on the CYUSBS234 DVK.

Thanks,

Yatheesh

[JaMa_3208951]

Hi Yatheesh,

Thank you for the response.

Do you know if these devices can be configured outside of the configuration utility in a scripted process to speed up configuring multiple parts?

Jake

[YatheeshD_36]

Hello Jake,

Yes, we have a command line tool to batch program USB-Serial Devices with a specific configuration.

Please refer to this thread: Re: CY7C65211 Serial Communication Mode

Let me know if you have any queries on the programming part.

Thanks,

Yatheesh