- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
We have an existing product that we are about to modify and require the software running on the CY8C24894-24LFXI to be modified.
Compilation of the existing project in the latest version of Creator is successful and a hex file is created, however writing the file to the chip and powering up sees the software not running successfully.
However writing the old hex file to the chip and powering up sees the device behave appropriately.
Would you be able to please indicate the recommended version of Creator to use with this chip?
Is there anything you need from me to determine the version of Creator required?
Regards,
Ben Venturato
System Engineer
Fire Alarm Monitoring
Chubb Fire & Security Pty Limited
39 Talavera Road
Macquarie Park NSW, Australia 2113
Locked Bag 2007 North Ryde BC NSW, Australia 1670
Monitoring: 1300 715 571
Direct: (61) 2 9581 6547
Mobile (61) 401 779 109
ABN - 47 000 067 541
Please do not print this e-mail unless you really need to.
This message may contain confidential and/or privileged information of Chubb Fire & Security and its affiliated companies. If you are not the intended recipient please 1) do not disclose, copy, distribute or use this information, 2) do advise the sender by return e-mail and 3) do delete all copies from your computer. Your cooperation is greatly appreciated. Any views or opinions expressed in this e-mail are those of the individual and not necessarily of Chubb Fire & Security. Neither the sending company nor its group of companies accepts any liability whatsoever for any loss or damage which may be caused as a result of the transmission of this message by e-mail.
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
PSoC Creator does not support PSoC 1 devices development. You need to use PSoC Designer instead.
Refer to the following documentation to get started with PSoC 1 - https://www.cypress.com/file/45491/download
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
PSoC Creator does not support PSoC 1 devices development. You need to use PSoC Designer instead.
Refer to the following documentation to get started with PSoC 1 - https://www.cypress.com/file/45491/download