PSOC62 : CY8C624ABZI-S2D44 Pull Down Issue:

[BiMa_2659891]

HI Cypress Team,

In my custom board which uses PSOC62 BGA part: CY8C624ABZI-S2D44, we are facing issue in configuring the pull-down.

Can you please let me know your feedback on below:

1) What is the Strong Pull down value for PSOC62?

2) What is the Weak pull down value for PSOC62?

3) I wanted to configure my IO (P12.0) as Input with Weak pull-down, Please let us know the proper procedure to configure it correctly.

4) The same design is working fine on PSOC4 based custom board.

[Len_CONSULTRON · Accepted solution]

BiMa,

Excellent question!

I've tried to look up the information in the part's datasheet.   The best I could come up with is a pull-down resistance spec for the GPIO of 3.5kΩ min, 5.6kΩ typ and 8.5kΩ max.  I assume this is the strong pull-down.  I could not find the "weak" resistance spec.

Len