Cypress USB EZ-HOST

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
RoRu_4703786
Level 1
Level 1
First like received

Good afternoon Cypress. I have a two questions:

1. In the file 38-08015 Ez-Host Cy7C67300. We are talking about the Cpu Speed ​​register (C008) R / W. By default, this register is 0x07CF. Which means that the CPU speed is 48 Mhz / 16.

While the bits responsible for the speed are available for writing. However, when trying to write the value 0x07С0, or any other value to make the CPU speed 48 Mhz / 1.

The value of this register is not changed. Is it even possible to write data to Control Registers?

2. I was able to read the data using CyConsole. However, I noticed that the high and low bytes that we read are reversed.

And this is not an isolated case. The explanation can be seen in the screenshots.ScreenShot_4.pngScreenShot_5.png

0 Likes
1 Reply
Hemanth
Moderator
Moderator
Moderator
First like given First question asked 750 replies posted

Hi,

Please provide the code snippets of below:

1. How is the CPU speed register accessed?

2. Implementation of vendor command 0xFF.

Regards,

Hemanth

Hemanth
0 Likes