- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I am trying to program the CY8C4245AX1-483. I have a .cysch file with a PWM component. On the PWM I have a clock and pin. On the .CYDWR, I show the CY8C4245AX1-483 device and the pin. I selected the pin and configured it to port P1(6). I placed PWM_1_Start(); in my main.C file. I performed a successful build (no erros). My EVAL board is plugged into my PC's USB socket. I have a yellow light on the board and a blue flashing light. But I cannot program the board. When I go to select target and program. I don't see anything in the list. Is it possible the PSOC Creator 4.3 application does not see the EVAL board? If so, what do I need to do to get the PSOC Creator 4.3 application to see the EVAL board?
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
As different from recent PSoC 4 Prototyping kits, CY8CKIT-049-42xx does not have KitProg to program the device with SWD interface. Instead of KitProg the Prototyping kit has a USB-UART interface which is used to communicate with the bootloader program on the target PSoC4.
Please refer the section "3.3 Programming a CY8CKIT-049-4xxx Project Using the Bootloader" in the document "CY8CKIT-049-4xxx PSoC 4 Prototyping Kit Guide" on the following page.
https://www.cypress.com/cy8ckit-049
PSoC® 4 CY8CKIT-049 4xxx Prototyping Kits
Regards,
Noriaki
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
As different from recent PSoC 4 Prototyping kits, CY8CKIT-049-42xx does not have KitProg to program the device with SWD interface. Instead of KitProg the Prototyping kit has a USB-UART interface which is used to communicate with the bootloader program on the target PSoC4.
Please refer the section "3.3 Programming a CY8CKIT-049-4xxx Project Using the Bootloader" in the document "CY8CKIT-049-4xxx PSoC 4 Prototyping Kit Guide" on the following page.
https://www.cypress.com/cy8ckit-049
PSoC® 4 CY8CKIT-049 4xxx Prototyping Kits
Regards,
Noriaki