Community Translation - With the Cypress S25FL1-K device, is it possible to READ from the FLASH during an active PROGRAM or ERASE operation? - KBA203616

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Kenshow
Level 8
Level 8
Distributor - Marubun (Japan)
50 solutions authored 25 solutions authored 10 solutions authored

Hi,               

I would like to translate KBA203616 into Japanese.

Please confirm to my work.

Thanks,

Kenshow

0 Likes
2 Replies
JennaJo
Moderator
Moderator
Moderator
1000 replies posted 750 replies posted 500 replies posted

Hi, Kenshow-san

Confirm to work this KBA.

Thanks,

Jenna

Jenna Jo
0 Likes
Kenshow
Level 8
Level 8
Distributor - Marubun (Japan)
50 solutions authored 25 solutions authored 10 solutions authored

Hi Jenna-san,

                                

Japanese translation was over.
Please check below.

Original KBA:

With the Cypress S25FL1-K device, is it possible to READ from the FLASH during an active PROGRAM or ...

Thanks.

Kenshow

==============================

タイトル: サイプレスS25FL1-Kデバイスで、アクティブなプログラムまたは消去操作中にフラッシュから読み取ることは可能ですか? - KBA203616

バージョン:*A

質問:

サイプレスS25FL1-Kデバイスで、アクティブなプログラムまたは消去操作中にフラッシュから読み取ることは可能ですか?

回答:

S25FL1-Kがプログラムまたは消去されている間、ステータスレジスタの読み出しとサスペンドコマンドを除く他のすべてのコマンドは、プログラムまたは消去サイクルが完了するまで無視されます。ステータスレジスタへの書き込み中は、ステータスレジスタの書き込み操作が完了するまで、ステータスレジスタの読み取りを除くすべてのコマンドは無視されます。つまり、アクティブなプログラム、消去、または書き込みサイクル(組み込み操作)中にS25FL1-Kのメモリアレイの内容を読み取る試みはすべて無視されます。現在の組み込み操作は、何の影響もなく実行され続けます。

実際、これはすべての「シングルバンク」フラッシュデバイスの一般的なルールです。「マルチバンク」であるいくつかのフラッシュデバイスがあり、進行中のプログラムまたは消去によるビジー状態の範囲は1つのバンクに制限されています。ただし、多くのフラッシュチップデザインにはS25FL1-Kのように1つのバンクしかありません。そのため、そのバンクがビジーになると、フラッシュアレイからデータを読み取ることができなくなります。

==============================

21-July-2020

  Kenshow

0 Likes