- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
I tried looking through the datasheet and documentation for the EVK, but couldn't find any information. What is the current limit for the 3.3V output on the BCR evaluation kit? (Pin V3P3 on J1 and "3.3V Output from BCR")
Thank you
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
"V3P3 pin on J1" and "3.3V Output from BCR" are connected to VDDD pin output of the BCR chip. This pin should just be used as a test point to measure VDDD voltage. It should not be used to power any external load. Therefore current limit for this output is not relevant.
Regards,
Pranava
Pranava
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
"V3P3 pin on J1" and "3.3V Output from BCR" are connected to VDDD pin output of the BCR chip. This pin should just be used as a test point to measure VDDD voltage. It should not be used to power any external load. Therefore current limit for this output is not relevant.
Regards,
Pranava
Pranava