Pin 2.6

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
EfAv_4380776
Level 1
Level 1

Hello everyone, I'm using an OpAmp: OA[0] on the PSoC 4 BLE, the kit is CY8CKIT-042-BLE.

The Vplus pin is P2.6 as it's listed on the Design Wide Resource on PSoC Creator, but it isn't available physically because it is used for LED3 on the board and is soldered.

I can't find another pin that stands as Vplus for Opamp0.

How can I access this pin externally?

thanks

0 Likes
1 Solution
NoriTan
Employee
Employee
25 sign-ins 5 questions asked 10 sign-ins

You can use P2.0 as an alternative pin.

GS004787.png

The VPLUS input can be routed to one of Pn.0, Pn.6 and AMUXBUSA as described in the "PSoC 41XX_BLE/42XX_BLE Family PSoC 4 BLE Architecture TRM, Document No. 001-92738" as follows.

GS004786.png

If you decide to use the AMUXBUSA, most pins can be routed to VPLUS by occupying the AMUXBUSA for this purpose.

Regards,

Noriaki

View solution in original post

2 Replies
NoriTan
Employee
Employee
25 sign-ins 5 questions asked 10 sign-ins

You can use P2.0 as an alternative pin.

GS004787.png

The VPLUS input can be routed to one of Pn.0, Pn.6 and AMUXBUSA as described in the "PSoC 41XX_BLE/42XX_BLE Family PSoC 4 BLE Architecture TRM, Document No. 001-92738" as follows.

GS004786.png

If you decide to use the AMUXBUSA, most pins can be routed to VPLUS by occupying the AMUXBUSA for this purpose.

Regards,

Noriaki

Thank you so much!
This answered my question

0 Likes