How to specify scan frequency in scanning?

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
SaSh_283021
Level 1
Level 1

How to specify in Snip.scan that it should only scan 2.4 GHz channels?

I am using CYW43907.

Thanks and Regards,

Sapan Shah

0 Likes
1 Solution
KotnaniK_71
Employee
Employee
50 likes received 25 likes received 10 likes received

Hi Sapan,

You can try building the test.console example app and use the wl command "wl band b" to set the 2.4 Ghz frequency band.

If you issue the scan command after this, it should be able to scan the channels only in 2.4 Ghz band.

Thanks.

View solution in original post

1 Reply
KotnaniK_71
Employee
Employee
50 likes received 25 likes received 10 likes received

Hi Sapan,

You can try building the test.console example app and use the wl command "wl band b" to set the 2.4 Ghz frequency band.

If you issue the scan command after this, it should be able to scan the channels only in 2.4 Ghz band.

Thanks.