- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I can run Coded Phy 1M and 2M?
And about LE 2M and LE 1M? Works at CYW4343?
AoA and AoD works too?
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
While the CYW4343W is certified for BT 5.0 with the latest patches and security fixes, it does not support any of the BT 5 optional features.
If you are interested in a BT 5 dual-band combo device that is ultra low power, take a look at the CYW43012. This device supports BT 5 2Mb/s PHY and is also fully supported with PSoC 6 inside of ModusToolbox
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thanks Anjana.
And about I can run Coded Phy 1M and 2M? Run?
Regards
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
While the CYW4343W is certified for BT 5.0 with the latest patches and security fixes, it does not support any of the BT 5 optional features.
If you are interested in a BT 5 dual-band combo device that is ultra low power, take a look at the CYW43012. This device supports BT 5 2Mb/s PHY and is also fully supported with PSoC 6 inside of ModusToolbox
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I notice that the CYW43012 it's used at Murata module 1LV:
https://wireless.murata.com/type-1lv.html
The Linux drivers for use this device at a iMX7 NXP processor it's avaliable? Do you know this?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Yes. Please reach out to Murata locally and they will walk you through the Embedded Artist m.2 offering for i.MX 6/7/8
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Very good to know. Thanks for the answer.
But our customer choose the SOM from Compulab and need to put the Murata module to work with this SOM:
SOM-iMX7-C1000D-D256-N128-E2
SOM-iMX7-C1000D-D1G-N4G-E2
In this case Linux device drivers are not avaliable, it's this?
Could you confirm?
Regards
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Not familiar with Compulab, but either Compulab or Murata should be able to discuss Linux driver availability for this SOM.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Ok.
I will talk with Compulab and Murata reps here in Brazil to try to assist the customer.
And just to confirm: whit CYW43012 I can run Coded Phy 1M and 2M? And LE 2M and LE 1M? AoA and AoD works too?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
LE 2M and LE 1M.
Coded PHY and ALE are not supported on this device
AoA and AoD support is not available by default either.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Ok.
Thank you.
I will inform to the customer that they just can use LE 2M and LE 1M at CYW43012.
And can't use Coded PHY and ALE or AoA and AoD.
Regards,
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Does the Compulab SOM use a Murata module, or one from another manufacture? If the latter, than what role does the Murata module you referenced serve in the use case?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
No..
Compulab have a SOM model with a TI WiLink8 WiFi + Bluetooth module.
But the customer will buy a verson without wireless module and will use the Murata Module outside, in a baseboard that they will develop.