4 Replies Latest reply on May 13, 2020 9:22 PM by SheetalJ_96

    [CYBT-343026-01] Regarding setting method of Tx_Power value of BLE/BDR/EDR

    YoJa_3107936

      Hi everyone

       

      Regarding setting method of Tx_Power value of BLE / BDR / EDR.

      If we refer to the following site and set Tx_pwer (as datasheet), then we can get below output value.

      Configuring Transmit (Tx) Power on CYW20706 Chip - KBA228573

      Is the below understanding correct?

      BDR / EDR + 12dBm setting → BDR + 12dBm (typ) / EDR + 9dBm (typ) (Can get the output)

      BLE + 8dBm setting → BLE + 9dBm (max) (Can get the output)

       

      BTW, check the following information.

      The link below is currently inaccessible.

      https://community.cypress.com/community/wiced-studio-blueooth/wiced-studio-bluetooth-forums/blog/2018/01/24/configuring-transmit-tx-power-in-cyw20706

       

      Have you changed to the following site?

      https://community.cypress.com/docs/DOC-18312

       

      Thanks

      Yang