- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
I'd like to translate KBA221305
moto
Original KBA: KBA221305
Silicon ID Mismatch while Programming PSoC® Devices - KBA221305
Translated by: MoTa_728816
==============================
タイトル:PSoC® デバイスプログラミング中に発生するシリコン ID 不一致エラーについて - KBA221305
ヴァージョン:**
質問:
PSoC デバイスのプログラミング中に、シリコン ID 不一致 というエラーが発生します。どのように対処したら良いでしょうか?
回答:
一般にこのエラーが発生するシナリオは二つあります。
1. 取得されたシリコン ID が、データベースに登録されているものと全く違う場合。例えば、期待されているシリコン ID が “0E 21 11 9E” であるのに、「Detected silicon ID: "FF FF 12 A3" is not in database」というエラーが報告される場合。
原因:これはコアが推奨電圧よりも高い電圧で駆動されている場合に発生する可能性があります。例えば、PSOC 4 Vccd ピンの推奨最大電圧は 1.89V です。設計者が誤って Vccd と Vddd を接続してしまった場合、Vccd ピンには 3.3/5V が供給されます。これは上記のようなエラーを発生する原因になるだけではなくコアを破損する可能性もあります。
2. 所得されたシリコン ID の三番目のバイトがデータベースの byte[2] と異なる場合。例えば、 期待されているシリコン ID が “0E 21 11 9E” であるのに、「Detected silicon ID: "0E 21 19 9E" is not in database」というエラーが報告される場合。
原因:このエラーは独自のデバイスプログラマーを開発してプログラムを行おうとした場合に発生します。三番目のバイトはシリコンのリビジョン ID を示します。
byte[0] - シリコン ID MSB
byte[1] - シリコン ID LSB
byte[2] - リビジョン ID
byte[3] - ファミリ ID
リビジョン ID はプログラミングには関与しませんので無視してください。リビジョン ID の変化は機能には影響を与えません。
==============================
28-Apr-2020
moto
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello, Tanaka-san
We receive your translation, it will be published to KBA to Community.
After upload, You will receive the points as the word of KBA.
Due to the current delay of processed work, Please bear with me for the delayed the response.
It could be delayed, but it will be processed soon.
Thanks for your contribution to CDC!
Will keep you update the status.
Thanks,
Jenna Jo
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Jenna-san,
My 2nd review is done.
I picked up the part that would be fixed as follows:
> リビジョン ID の変化は機能には影響を与えません。
< リビジョン ID の変更は機能には影響を与えません。
Thanks,
Kenshow
12-Nov-2020