- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
I tried to translate this KBA2226674 into Japanese.
Access and Modify CapSense Register Map in Firmware - KBA2226674
https://community.cypress.com/docs/DOC-16931
----------------------------------
タイトル:ファームウェア内のCapSenseレジスタマップへのアクセスと変更
質問:
CapSense®コンポーネントのバージョン3.0以降でファームウェアを介してCapSense レジスタマップを読み書きするにはどうすればよいですか?
回答:
GetParam() および SetParam() API関数をそれぞれ使用して、ファームウェア内の CapSenseパラメーターを動的にアクセス、および変更ができます。
読み取り操作:
CapSense_GetParam (uint32 paramId, uint32 * value);
このAPIに引数として次のパラメーターを使用します:
- paramId
各レジスターの paramIdは、CapSense_<ParameterName>_PARAM_ID として CapSense RegisterMap ヘッダーファイル内で得られます。
- value
value は、CapSenseレジスタから取得した値で更新される変数へのポインタです。
書き込み操作:
CapSense_SetParam (uint32 paramId, uint32 value);
このAPIに引数として次のパラメーターを使用します:
- paramId
各レジスターの paramIdは、CapSense_<ParameterName>_PARAM_ID として CapSense RegisterMap ヘッダーファイル内で得られます。
- value
CapSenseレジスタで更新される新しい値を保持する変数です。
注意:
- paramIdのフォーマットの詳細については、CapSenseコンポーネントデータシートを参照してください。また、特定のパラメーターの読み取り/書き込み権限に関する情報も提供しています。
- CapSenseパラメーターを変更した後、コンポーネントの再初期化が必要になる場合があります。この情報は、エクスポートされたレジスタマップファイルの各レジスタとして入手できます。(CapSenseコンポーネントカスタマイザ画面から [Export Register Map] を選択します)。
----------------------------------
Best regards,
obana
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello, Obana-san
We receive your translation, it will be published to KBA to Community.
It will be reviewed internally.
After upload, You will receive the points as the word of KBA.
Due to the current volume of works (waiting review, etc.), Please bear with me for the delayed the response.
It could be delayed, but it will be processed soon.
Thanks for your contribution to CDC!
Will keep you update the status.
Thanks,
Jenna Jo