- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
when I try to run a demo on the board, I cannot connect to my wlan hot spot ( iphone).
target : demo.aws_iot.shadow-BCM94343W_AVN download run
Starting WICED v3.4.0-AWS
Platform BCM94343W_AVN initialised
Started ThreadX v5.6
Initialising NetX_Duo v5.7_sp2
Creating Packet pools
WWD SDIO interface initialised
WLAN MAC Address : B0:38:29:3D:3C:3D
WLAN Firmware : wl0: Nov 25 2015 12:57:14 version 7.45.45.1 (r602358) FWID 01-1920c040
Please wait, connecting to network...
(To return to SSID console screen, hold USER switch for 5 seconds during RESET to clear DCT configuration)
*******************************************************
Config SSID : WICED_AWS
Password : 12345678
IP Address : 192.168.0.1
*******************************************************
my config wifi_config:
#define CONFIG_AP_SSID "WICED_AWS"
#define CONFIG_AP_CHANNEL 1
#define CONFIG_AP_SECURITY WICED_SECURITY_WPA2_AES_PSK
#define CONFIG_AP_PASSPHRASE "12345678"
/* This is the soft AP available for normal operation (if used)*/
#define SOFT_AP_SSID "WICED Device"
#define SOFT_AP_CHANNEL 1
#define SOFT_AP_SECURITY WICED_SECURITY_WPA2_AES_PSK
#define SOFT_AP_PASSPHRASE "WICED_PASSPHRASE"
/* This is the default AP the device will connect to (as a client)*/
/* This is the default AP the device will connect to (as a client)*/
#define CLIENT_AP_SSID "my iPhone"
#define CLIENT_AP_PASSPHRASE "xxxxx"
#define CLIENT_AP_BSS_TYPE WICED_BSS_TYPE_INFRASTRUCTURE
#define CLIENT_AP_SECURITY WICED_SECURITY_WPA2_MIXED_PSK
#define CLIENT_AP_CHANNEL 1
#define CLIENT_AP_BAND WICED_802_11_BAND_2_4GHZ
/* This is the network interface the device will work with */
#define WICED_NETWORK_INTERFACE WICED_STA_INTERFACE
But when I run a sample without
aws_config.c & aws_common.c
like in target : demo.aws_iot.pub_sub.publisher-BCM94343W_AVN download run
I have access to my hotspot
what i my problem ?
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
I tried to reproduce the same issue and it works fine with me. Please find the details below.
WICED SDK 3.5.2 ( I highly recommend using the lastest version for the SDK)
App- demo.aws_iot.shadow
HW- BCM94343WWCD1 (should work on BCM94343W_AVN)
I tried pairing it with my iPhone using hot spot and build the application.
Here are the screen shot of the same.
- After downloading and running the app I connect my system to WICED_AWS softap and browse to the IP address.
- Uploaded my certificate and Key. and click on Wi-Fi Setup.
- Selected iPhone as my AP and click Connect.
- And it was successfully connected.
- I was able to see the connection successful on UART
- I would recommend you to try the following:
- Use the latest SDK.
- Make sure you Keys and certificated are correct.
- Make sure your MQTT is working.
I hope this is helpful.
Thanks
RJ
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
I tried to reproduce the same issue and it works fine with me. Please find the details below.
WICED SDK 3.5.2 ( I highly recommend using the lastest version for the SDK)
App- demo.aws_iot.shadow
HW- BCM94343WWCD1 (should work on BCM94343W_AVN)
I tried pairing it with my iPhone using hot spot and build the application.
Here are the screen shot of the same.
- After downloading and running the app I connect my system to WICED_AWS softap and browse to the IP address.
- Uploaded my certificate and Key. and click on Wi-Fi Setup.
- Selected iPhone as my AP and click Connect.
- And it was successfully connected.
- I was able to see the connection successful on UART
- I would recommend you to try the following:
- Use the latest SDK.
- Make sure you Keys and certificated are correct.
- Make sure your MQTT is working.
I hope this is helpful.
Thanks
RJ
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
thx, yes, i works with sdk 3.5.2
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
salesforce.asg.demo@accenture.com
I am trying to make it work with v3.4.0-AWS and BCM4343W_AVN too. I will keep you updated.