- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I've downloaded the example program "Ramping_LED_using_Smart_IO" for ModusToolbox 2.1.
I build it (no errors) and program a CY8CPROTO-062-4343W. It doesn't work.
Am I missing something?
Len
"Engineering is an Art. The Art of Compromise."
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
To all,
In the ReadMe.md file there is a line:
1. Using a jumper wire, connect the Smart I/O output pin to the User LED pin on the board (See Table 1). Observe the ramping effect on the User LED .
And in Table 1:
| Board | Smart I/O Output Pin | LED Pin |
| --------------------|----------------------|---------|
| CY8CKIT-062-BLE | P9[1] | P13[7] |
| CY8CKIT-062-WIFI-BT | P9[1] | P13[7] |
| CY8CPROTO-062-4343W | P9[1] | P13[7] |
| CY8CPROTO-063-BLE | P9[1] | P7[1] | Red LED P6[3]
| CY8CKIT-062S2-43012 | A9 | R.LED |
Missed it. Got it.
Boy I miss the digital (and analog) pin routing capabilities of the PSoC5.
Len
"Engineering is an Art. The Art of Compromise."
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
To all,
In the ReadMe.md file there is a line:
1. Using a jumper wire, connect the Smart I/O output pin to the User LED pin on the board (See Table 1). Observe the ramping effect on the User LED .
And in Table 1:
| Board | Smart I/O Output Pin | LED Pin |
| --------------------|----------------------|---------|
| CY8CKIT-062-BLE | P9[1] | P13[7] |
| CY8CKIT-062-WIFI-BT | P9[1] | P13[7] |
| CY8CPROTO-062-4343W | P9[1] | P13[7] |
| CY8CPROTO-063-BLE | P9[1] | P7[1] | Red LED P6[3]
| CY8CKIT-062S2-43012 | A9 | R.LED |
Missed it. Got it.
Boy I miss the digital (and analog) pin routing capabilities of the PSoC5.
Len
"Engineering is an Art. The Art of Compromise."