Cannot connect Kitpro to Psoc 4100S Plus CY8C4147AZI-S445

[long_4668236]

Hi all,

I am getting start with Cypress MCU.

I try connect  Kitpro (use kit CY8CKIT-059) with Psoc 4100S Plus CY8C4147AZI-S445, but it cannot detect MCU.

Thanks all.

[Rakshith]

Hi long_4668236​,

Can you please provide more details regarding the issue?

1. What error are you getting?

2. Is your schematic and layout design matching with the PSoC 4 hardware design considerations?

3. What are the connections between the target device and KitProg?

4. How are you trying to program the device?

Thanks and Regards,

Rakshith M B

[long_4668236]

Hi Rakshith,

My reply below:

1. What error are you getting?

=> I cannot get device in debug target like image below:

2. Is your schematic and layout design matching with the PSoC 4 hardware design considerations?

=> I use ASR6501 module  (core Psoc 4100S Plus CY8C4147AZI-S445).

3. What are the connections between the target device and KitProg?

=>

4. How are you trying to program the device?

=> i use example code from asr6501. PsoC Creater 4.3.

[Rakshith]

Hi long_4668236,

I am not able to access the images. Can you please reshare the images?

Please also refer to this thread - CY8c4147AZI-s445 48-TQFP device is not available in PSoC Creator 4.2

Thanks and Regards,

Rakshith M B

[long_4668236]

Hi Rakshith,

Link image connect to debug:

https://drive.google.com/open?id=18HfLXdkKvWtuJw-FlHrrgzsFW-sf6VSL

Link image error detect MCU.

https://drive.google.com/open?id=1Q7uDWAFep4zByLJ5KtlKr2J5opWynKPC

Thanks,

[long_4668236]

Hi Rakshith,

I try with Psoc Programmer, but I return error.

Connect  Kitprog to MCU.

[Rakshith · Accepted solution]

Hi long_4668236,

To program the a PSoC 4100 S Plus you will need a KitProg2 or KitProg3. The PSoC 5LP Kit has a KitProg which does not support PSoC 4100 S Plus. I am sorry for overlooking this part. Please refer to KitProg User Guide and KitProg2 User Guide for further information.

Devices supported by KitProg -

Devices supported by KitProg2 -

Thanks and Regards,

Rakshith M B

[long_4668236]

Hi Rakshith,

Thanks for your help.

Can i change kitprog to kitprog2 by update firmware, i cannot buy kitprog2 in my country.

thanks,

[long_4668236]

Hi Rakshith,

Can i use J-link segger v8 to program for Cypress 4100S plus ?

Thanks,

[Rakshith]

Hi long_4668236,

Can i change kitprog to kitprog2 by update firmware

Unfortunately, this is not possible.

Can i use J-link segger v8 to program for Cypress 4100S plus ?

Yes, you can use JLink probes to program PSoC 4 devices. Please note that you will need to export your PSoC Creator project into Keil uVision IDE to use JLink probes.

The steps that are needed to be followed to export a PSoC 4 project from PSoC Creator to Keil uVision can be found in –

Help > PSoC Creator Help Topics > Integrating into 3^rd Party IDEs

For the list of devices supported by Link please refer to this link - https://www.segger.com/products/debug-probes/j-link/technology/cpus-and-devices/overview-of-supporte...

Thanks and Regards,

Rakshith M B

[long_4668236]

Hi Rakshith,

Thanks for your help,