PVref_P4 still in preliminary prototype state?

[NorbertWitt]

Hi community.

I am using the PVref_P4 Programmable Voltage Reference on a prototype device within a CY8C4145AZI-PS423. This seems working very well. Within PSoC Creator it appears with a red background and is labeled as "Prototype", the datasheet referenced from PSoC Creator is labled as "PRELIMINARY". Meanwhile I found a datasheet with the same title "PSoC 4 Programmable Voltage Reference (PVref_P4)1.0" but inside labeled as "Document Number: 002-10611 Rev. *C", which is no longer "PRELIMINARY".

My questions: Can I use this component now for production? Will there be an update for this component within PSoc Creator, without "protoype" labeling?

Best regards,

Norbert Witt

[Vasanth]

Hi Norbert,

We are confirming this with our software team internally. Give us some time to come back to you.

Best Regards,
Vasanth

[Vasanth · Accepted solution]

Hi Norbert,

Thanks for the patience. I have received confirmation from our software team that the component can be used for production.

Best Regards,

Vasanth R S

[NorbertWitt]

Hi Vasanth.

Great!

Thanks a lot!

Best regards,

Norbert Witt