- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Dear representative,
While using Linux OS, is there any way to disable one of the 2x BLE devices, automatically attached, to the Linux OS?
There is a way to disable both BLE with this command, e.g.:
echo '2-1' > /sys/bus/usb/drivers/usb/unbind #OFF
Doing so does not achieve what I need because I only want to disable one of the 2x Cypress BLE devices.
Any help on this matter is appreciated.
Thanks.
Solved! Go to Solution.
- Labels:
-
HCI UART
- Tags:
- cybt-413034-02
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Ok I've found a working solution:
echo 0 > /sys/bus/usb/devices/2-1:1.0/authorized
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Please note which device you are referring to...
CYW20719/20819, CYW20704/6/7, WiFi/BT Combo, etc.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
ID: CYBT-413034-02
For now I can only provide the VID & PID:
ID 04b4:0005 Cypress Semiconductor Corp.
Edit: After more searching I've found this other code:
CY7C65215-32LTXI
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Ok I've found a working solution:
echo 0 > /sys/bus/usb/devices/2-1:1.0/authorized