- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
I am using PSoC3 to design my project, and use the USBFS module to communicate with PC via HID.
I have designed the HID descriptor in my project, in HID descriptor included two feature Item. and I met the following issues:
For the two feature items, there are two groups data for each feature, and I don't know how to assign the data to each feature.
BTW: In the USBFS data sheet: please see the attached two picture, which may releated to the topic, but I don't know how to use it.
I am not sure if I have describe the quesiton clear, if you have any doubt, please feel free let me know.
I can also put my project here for you reference, if need.
Br
PSoC_USB
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
Please refer to the Application note on USB HID Basics with PSOC 3 and PSoC 5LP: https://www.cypress.com/file/136381/download
The application note describes in detail the different items that are a part of HID Report descriptor.
The application note also contains description to create a HID mouse project. Step by Step detail on how to add different items to HID report when creating a project is also given.
Please feel free to correct me if my understanding of the question is not clear.
Best Regards
Ekta
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
Please refer to the Application note on USB HID Basics with PSOC 3 and PSoC 5LP: https://www.cypress.com/file/136381/download
The application note describes in detail the different items that are a part of HID Report descriptor.
The application note also contains description to create a HID mouse project. Step by Step detail on how to add different items to HID report when creating a project is also given.
Please feel free to correct me if my understanding of the question is not clear.
Best Regards
Ekta
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
@Hello EktaN,
Very glad to get the feedback from you. thanks a lot.
Unfortunately, in the AN there is no the topic related to the quesiton. I want to know how to use the featrue item, however, In AN there is no this kinds of information. I know that this function is very customer to use.
I have try my best to describe the quesiton in the attached document to make you clear and I also attached the project for you.
Br
PSoC_USB
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello EktaN,
In my project, I just use one feature for ID:12, I don't know why does it create two reprot storage for this feature.
Br
PSoC_USB