- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I am starting a new design.
Requirements:
Low power!!!!
BLE
RFID
Energy harvesting -- light, kinetic,
misc digital and analog IO
Looking for eval kit that will allow me to easily and quickly characterize these requirements.
Your thoughts?
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Bernard,
You can use the CY8CKIT-062-WiFi-BT which has a Bluetooth, WI-FI ,simple i/o.
You can refer to the below app note - PSoC 6 MCU Low-Power Modes and Power Reduction Techniques
https://www.cypress.com/file/385936/download
Since most of the chips do not have RFID, you have to interface the sensor to the PSOC device.
Regards
Alakananda
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Bernard,
You can use the PSoC® 6 BLE Pioneer Kit which will meet your requirements.
You can go through the datasheet of the device - https://www.cypress.com/file/385921/download
You can also purchase the kit from here - https://www.cypress.com/documentation/development-kitsboards/psoc-6-ble-pioneer-kit-cy8ckit-062-ble
Regards
Alakananda
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I can see how the PSoC® 6 BLE Pioneer Kit will allow me to check out BLE, but what about RFID and energy harvesting? I forgot to mention that I need to check out wifi. I am open to purchasing extra modules to accommodate the additional functionalities. Just need to know which ones and will work with this kit.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Are you looking for standalone WiFi chips or WiFi-BT combo chips?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
MuraliR_36, I am open. I realize the micro in the PSoC® 6 BLE Pioneer Kit has integrated bluetooth, but not wifi. This is one reason I thought AlakanandaB_86's response was overly simplistic.
I see the CY8CKIT-062-WiFi-BT that uses the CYW43012 combo chip. This could work.
Neither of the kits mentioned so far does RFID and energy harvesting directly. Still looking for a kit with least amount of add-ons that will allow me to characterize:
low power,
bluetooth,
wifi,
rfid,
energy harvesting.
simple i/o.
This is all for a quick proof of concept. Once proven we will design a proper circuit.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Bernard,
You can use the CY8CKIT-062-WiFi-BT which has a Bluetooth, WI-FI ,simple i/o.
You can refer to the below app note - PSoC 6 MCU Low-Power Modes and Power Reduction Techniques
https://www.cypress.com/file/385936/download
Since most of the chips do not have RFID, you have to interface the sensor to the PSOC device.
Regards
Alakananda
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
HI AlakanandaB_86,
Can you recommend a RFID eval setup that would work with CY8CKIT-062-WiFi-BT?
Kind regards.
Bernie
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
We do not recommend any eval setup from our end.
Depending on the operating voltage(1.7V - 3.6V), current and other specifications of the the PSOC 6 device you can chose a suitable RFID eval setup.
Regards
Alakananda