- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
who can help me ,thank you,this is first time to use the mcu
Error in customizer for component "TCPWM_P4_v2_10" : Loading : (Failed to load assembly,
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi :
1:
Compile your project with PSoC Creator v4.2
please download and install CY8CKIT-049-41xx Kit Setup
https://www.cypress.com/file/184951/download
2: Project > Update Components (<project name>)...
3: Disable your bootloadable component. right click the component ,choose disable.
4: If you want to know more about the bootload and bootloadable project, please review the below linker application note.
https://www.cypress.com/documentation/application-notes/an86526-psoc-4-i2c-bootloader
5: Hope my response can be helpful for you.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
A customizer plugin for a piece of content has a bug. The author of the component will have to diagnose and fix the issue. Contact customer support
4.3
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Would you provide us some more clue?
What is the device/board are you using?
What are you trying to do? etc.
If you can attach your project it will nice.
(Assuming that you are using PSoC Creator)
To do so
(1) Menu: Build > Clean <your project>
(2) Menu: Project > Archive Workspace/Project...
(3) attach the result zip file to your post
moto
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
> A customizer plugin for a piece of content has a bug.
> The author of the component will have to diagnose and fix the issue.
> Contact customer support
>
> 4.3
Oh, I see >_<
moto
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
this is my first project,example CY8CKIT-049-41xx PSoC 4 Prototyping Kit,
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Seeing your screen shot..
Please try
Project > Update Components (<project name>)...
And see if it fix your problem.
Meantime, I'll see your project.
moto
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
same 7errors
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
my project only has main.c, i cant find project.h, can you give me a complete project? thank you
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
> my project only has main.c, i cant find project.h,
the "project.h" will be automatically generated when the PSoC Creator builds the project.
BTW, IMHO, CY8CKIT-049-4xxx are not the easiest board for a beginner,
as it requires bootloader and bootloadable for all the project.
Although you may be able to force through.
If you can afford, I strongly suggest you to get either of
CY8CKIT-042
CY8CKIT-043
CY8CKIT-044
or may be
CY8CKIT-149
These has on board KitProg so developing and debugging a project is much easier.
moto
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Having written the previous response.
If you want to go with the current board,
please read and proceed the procedure in
Getting Started with PSoC 4 Prototyping Kits - CY8CKIT-049 - Microcontroller - eewiki
moto
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Anyway, to compile your project with PSoC Creator v4.2
please download and install CY8CKIT-049-41xx Kit Setup
https://www.cypress.com/file/184951/download
Then in your project TopDesgin.cysch double click Bootloadable
In the Configure 'Bootloadable' Dialog
use "Browse" button of HEX file and ELF file
Both files are located
C:\Program Files (x86)\Cypress\CY8CKIT-049-41xx\1.0\Firmware\SCB_Bootloader\UART_Bootloader.cydsn\CortexM0\ARM_GCC_484\Debug
After setting the hex file and elf file, select [OK]
Then you should be able to compile the project. (At least I could)
moto
I also attached the hex file and elf file
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I think i find the cause. Our company has special antivirus software,Some other software may have problems。
Now Creator looks OK.
Thank you for your help。
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi :
1:
Compile your project with PSoC Creator v4.2
please download and install CY8CKIT-049-41xx Kit Setup
https://www.cypress.com/file/184951/download
2: Project > Update Components (<project name>)...
3: Disable your bootloadable component. right click the component ,choose disable.
4: If you want to know more about the bootload and bootloadable project, please review the below linker application note.
https://www.cypress.com/documentation/application-notes/an86526-psoc-4-i2c-bootloader
5: Hope my response can be helpful for you.