Hi.
I am noticing BLE connection problems with the BLE Proximity Reporter application running on ISM43341 hardware with WICED SDK 3.5.1 and LightBlue on iOS 9.2.
Starting WICED v3.5.1
Platform ISM43341_M4G_L44 initialised
Started ThreadX v5.6
Initialising NetX_Duo v5.7_sp2
Creating Packet pools
WWD SDIO interface initialised
WLAN MAC Address : C4:7F:51:80:25:6F
WLAN Firmware : wl0: Oct 13 2014 15:25:13 version 6.10.190.51 (r507746) FWID 01-60cadeb3
00000363 GKI_create_task func=0x8016e29 id=1 name=BTU stack=0x0 stackSize=6144
00000370 GKI_create_task func=0x80182a9 id=0 name=HCISU stack=0x0 stackSize=4096
Unhandled Bluetooth Management Event: 0x15
Bluetooth enabled (success)
Local Bluetooth Address: [43:34:1B:00:1F:AC]
---->>> New ADV state: 3
Waiting for proximity monitor to connect...
GATT connection to [6E:1C:87:98:71:E9] established.
---->>> New ADV state: 0
Local TX power: 4
GATT connection to [6E:1C:87:98:71:E9] released.
---->>> New ADV state: 3
Waiting for proximity monitor to connect...
GATT connection to [6E:1C:87:98:71:E9] established.
---->>> New ADV state: 0
Local TX power: 4
GATT connection to [6E:1C:87:98:71:E9] released.
---->>> New ADV state: 3
Waiting for proximity monitor to connect...
GATT connection to [6E:1C:87:98:71:E9] established.
---->>> New ADV state: 0
Local TX power: 4
GATT connection to [6E:1C:87:98:71:E9] released.
---->>> New ADV state: 3
Waiting for proximity monitor to connect...
GATT connection to [6E:1C:87:98:71:E9] established.
---->>> New ADV state: 0
Local TX power: 4
GATT connection to [6E:1C:87:98:71:E9] released.
---->>> New ADV state: 3
Waiting for proximity monitor to connect...
---->>> New ADV state: 4
---->>> New ADV state: 0
Just wanted to verify if this is a known problem and if there is a workaround.
