- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
We have a development project to design a Pulse Oximeter capable of BLE and BR performance. Cypress module CYBT-423028-02 looks to be a good fit.
Question 1: Is the stack running on the CYBT-423028-02 or do I need to run the stack on a separate microcontroller?
Question 2: Our application requires a number of security features including secure boot which ensures that only authenticated software can run on the module. Does the CYBT-423028-02 support this?
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The stack is hosted on the module.
The internal CYW20719 essentially has an internal 96-MHz Cortex®-M4 with 512KB SRAM, 1MB Flash, 2 MB ROM for the stack and drivers.
This means that both the Flash and RAM are available for the application.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The stack is hosted on the module.
The internal CYW20719 essentially has an internal 96-MHz Cortex®-M4 with 512KB SRAM, 1MB Flash, 2 MB ROM for the stack and drivers.
This means that both the Flash and RAM are available for the application.