Hi,
你好
Does the path to the "PSoC Creator" contains non-standard ascii letters, such as Kanji?
As I see "D:\????\PSoC Creator\4.2\..."
“ PSoC Creator”的路径是否包含非标准的ascii字母,例如汉字?
正如我看到的“ D:\ ???? \ PSoC Creator \ 4.2 \ ...”
I wonder if you can install "PSoC Creator" into a folder whose name has only ascii letters and numbers such as "D:\Cypress\PSoC Creator\4.2\..."
我想知道是否可以将“ PSoC Creator”安装到名称中只有ascii字母和数字的文件夹中,例如“ D:\ Cypress \ PSoC Creator \ 4.2 \ ...”
moto
基
Hi,
After
Project > Update Components ..
I could compile your project.
moto
Hi,
The following is a somewhat wordy description of my previous response 😉
(1) When opened your project, select Menu > Project > Update Components (YF_...)
(2) Component Update Tool Dialog will be shown, select "Next > "
(3) Review pending updates will be shown, select "Finish"
(4) To save/protect previous condition, an Archive dialog will be shown,
select Minimal (default) and Select "Archive"
(5) Archive log will be shown, select "OK"
(6) The folder which contains the archive file will be opened.
We don't need it right now, just close the window by selecting "X"
(7) Finally we are back to the workbench
(8) From short cut icon menu "Clean and Build <your project"
(9) On my PC, your project could be built.
Attached is an minimum archive of your project with updated component(s).
moto
我下载了你编译后的工程,在我这边编译还是会提示报错,如下截图,麻烦给看一下是什么原因,谢谢。
Hi
你好
All I can tell from the screen shot is that the compile failed.
Could you show us the messages in the "Output" tab next to the "Notice List"?
从屏幕快照中我只能看出编译失败。 您能否在“通知列表”旁边的“输出”选项卡中向我们显示消息?
Meantime, would you try "update components" with your project?
同时,您会在项目中尝试“更新组件”吗?
moto
基
你好
我已经按照您的说明进行了组件更新,但还是会报错,输出信息如下:
注:我这边用CapSense组件5.0是可以正常编译。6.0和7.0版本都是编译会报错,是否是该芯片不支持6.0和7.0的CapSense组件。
Hi,
你好
Does the path to the "PSoC Creator" contains non-standard ascii letters, such as Kanji?
As I see "D:\????\PSoC Creator\4.2\..."
“ PSoC Creator”的路径是否包含非标准的ascii字母,例如汉字?
正如我看到的“ D:\ ???? \ PSoC Creator \ 4.2 \ ...”
I wonder if you can install "PSoC Creator" into a folder whose name has only ascii letters and numbers such as "D:\Cypress\PSoC Creator\4.2\..."
我想知道是否可以将“ PSoC Creator”安装到名称中只有ascii字母和数字的文件夹中,例如“ D:\ Cypress \ PSoC Creator \ 4.2 \ ...”
moto
基