- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
I haven't been able to connect the node for a while from MeshClient.
Here is fragment of log:
17:58:37.744 Net transmit set addr:0001 count:3 interval:50
17:58:37.760 Net Transmit Status from:1 count:3 interval:50
17:58:37.775 Default TTL set addr:0001 TTL:63
17:58:37.775 Default TTL Status from:1 TTL:63 Received TTL:63
17:58:37.807 Beacon set addr:0001 state:0
17:58:37.807 Beacon Status from:1 state:0
17:58:37.807 Network opened
17:58:37.822 done
17:58:43.197 Proxy Connect type:1
17:58:50.209 Net Connect Proxy Connection status provisioner:0 connected:0 over_gatt:1
Does exist a workaround.
Thanks.
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
You need to provision and configure the device properly in-order to connect to it.
Please follow the document if you have any doubt in the usage of meshclient. MeshClient and ClientControlMesh App User Guide
Thanks,
-Dheeraj
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Please press the reset button on the mesh device and check whether the the device is in provisioned state or not.
"mesh_application_init: provisioned GATT DB status:0" => provisioned state. Otherwise log will show "unbprovisioned".
I believe your device went to some bad state or unprovisioned state.
Thanks,
-Dheeraj
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I've just tried the following (2 times):
- reprogram device
- reset device
- Mesh Client: Open Network
- Mesh Client: Connect
... and it failed 2 times.
Where I was wring ?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
You need to provision and configure the device properly in-order to connect to it.
Please follow the document if you have any doubt in the usage of meshclient. MeshClient and ClientControlMesh App User Guide
Thanks,
-Dheeraj