- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
We made a custom board which is using WM-AN-BM-23 from USI. I have to make some basic checks (button and LED wiring) on this board but I have to struggle to declare it in the platform file.
I've attached the platform files I have for the evalboard based on WM-AN-BM-23.
Please find below my pinout
Pin number | Label | Function |
---|---|---|
C11 | GPIO_0 | Button |
C10 | PWM_0 | LED Blue |
C9 | PWM_1 | LED Green |
A27 | PWM_2 | LED Red |
A52 | UART0_RXD_IN | UART |
A55 | UART0_TXD_OUT | UART |
B2 | I2C_1_SCL | SCL |
C1 | I2C_1_SDA | SDA |
Do you have a tutorial to know how to configure these pins?
Thank you!
Nicolas.
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello
Unfortunately, we do not have a ready guide on creating a custom platform file for 43907 based devices.
We have a blog post explaining on how to port STM based processors : STM32F469 porting in WICED
You could use this as a guide and try defining the platform file and let us know if you face any issues during the process.
Thanks
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello
Unfortunately, we do not have a ready guide on creating a custom platform file for 43907 based devices.
We have a blog post explaining on how to port STM based processors : STM32F469 porting in WICED
You could use this as a guide and try defining the platform file and let us know if you face any issues during the process.
Thanks