Miniprog4 vs Kitprog3 speeds?

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
DaEr_349131
Level 5
Level 5
25 likes received 50 sign-ins 5 comments on KBA

Anyone happen to know if there is a speed difference flashing with Miniprog 4 vs Kitprog 3?

Even though it's using Daplink v2, the psoc5 (used on the kitprog) has only FullSpeed USB, not sure if the hardware inside the Miniprog supports High Speed?

thx /david

0 Likes
1 Solution
DheerajK_81
Moderator
Moderator
Moderator
First comment on KBA First comment on blog 5 questions asked

Hello David,

Both Kitprog3 and the Miniprog4 have the same firmware, hence there won't be any speed difference. Miniprog4 is essentially Kitprog3 hardware itself but with additional protection circuits needed for programming (i.e to avoid failures due to over voltage etc.).

Hence, Miniprog4 too doesn't support USB high speed, it uses the PSoC5LP which has only USB full speed support.

Regards,

Dheeraj

View solution in original post

0 Likes
2 Replies
DheerajK_81
Moderator
Moderator
Moderator
First comment on KBA First comment on blog 5 questions asked

Hello David,

Both Kitprog3 and the Miniprog4 have the same firmware, hence there won't be any speed difference. Miniprog4 is essentially Kitprog3 hardware itself but with additional protection circuits needed for programming (i.e to avoid failures due to over voltage etc.).

Hence, Miniprog4 too doesn't support USB high speed, it uses the PSoC5LP which has only USB full speed support.

Regards,

Dheeraj

0 Likes

Thanks for info! Is there a schematic available for Miniprog4?

0 Likes