More detailed power consumption info for radstop QDR devices

[brbu_799096]

I'm evaluating the CYRS1542AV18 device for my application but the power at max rate is too high. I'd like to evaluate whether at lower clock rates (perhaps even bypassing the DLL) I can bring the power draw low enough to use but the data sheet does not provide that information nor does Cypress appear to provide a separate memory power calculator that includes this information (I'm aware of the calculator posted on this forum but that simply interpolates between 2 power points on the data sheet BUT the datasheet for this part only specifies power draw at max rate so can't interpolate!). Help would be appreciated thanks!

[HelmutP_71]

Hi,

we will post shortly the freq vs. Power dependency. If you are looking for lower power please take a look at the

CYRS1642KV18 device. About 300% power savings over the 72M device.

I have attached the D/S here

https://www.cypress.com/documentation/datasheets/cyrs1642kv18cyrs1644kv18-144-mbit-qdr-ii-sram-two-w...

Let me know if yo uhave further question

Helmut Puchner (helmut.puchner@cypress.com)