DAPLink on the CYBLE-416045-EVAL board?

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
AnKn_4627811
Level 1
Level 1

Does the CYBLE-416045-EVAL support DAPLink? I want to flash it with Mbed based firwmare. The fw-loader tool always shows a timeout.

Info: Start API initialization

Info: Connected - KitProg3 CMSIS-DAP HID-061208F302098400

Info: Hardware initialization complete (515 ms)

Info: Disconnected - KitProg3 CMSIS-DAP HID-061208F302098400

Info: Connected - KitProg3 CMSIS-DAP BULK-061208F302098400

Error: Wait for device DAPLink connect is timed out

Mode switch on 'KitProg3 CMSIS-DAP HID-061208F302098400' device failed.

Thanks

0 Likes
1 Solution
Rakshith
Moderator
Moderator
Moderator
250 likes received 1000 replies posted 750 replies posted

Hi ankn_4627811​,

Unfortunately fw-loader does not support CYBLE-416045-EVAL board. You can find this information in this link - https://github.com/cypresssemiconductorco/Firmware-loader/releases/tag/2.2.01.243

Release Firmware-loader 2.2.01.243 · cypresssemiconductorco/Firmware-loader · GitHub

mbed also does not support this board. You can find the list of devices that is supported by mbed in this folder directory - <mbed_project_directory>\mbed-os\targets\TARGET_Cypress\TARGET_PSOC6\

Hope this helps,

Thanks and Regards,

Rakshith M B

Thanks and Regards,
Rakshith M B

View solution in original post

0 Likes
1 Reply
Rakshith
Moderator
Moderator
Moderator
250 likes received 1000 replies posted 750 replies posted

Hi ankn_4627811​,

Unfortunately fw-loader does not support CYBLE-416045-EVAL board. You can find this information in this link - https://github.com/cypresssemiconductorco/Firmware-loader/releases/tag/2.2.01.243

Release Firmware-loader 2.2.01.243 · cypresssemiconductorco/Firmware-loader · GitHub

mbed also does not support this board. You can find the list of devices that is supported by mbed in this folder directory - <mbed_project_directory>\mbed-os\targets\TARGET_Cypress\TARGET_PSOC6\

Hope this helps,

Thanks and Regards,

Rakshith M B

Thanks and Regards,
Rakshith M B
0 Likes