- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
The following Modules are listed in v5.1 by Bluetooth SIG.
- CYBLE-022001-00 (DID: U048555)
- CYBLE-014008-00 (DID: U048554)
- CYBLE-012011-00 (DID: U048529)
In order to comply with Bluetooth v5.1, PSoC Creator Component "Bluetooth Low Energy (BLE)" needs to be updated to version 3.6.
https://www.cypress.com/file/494566/download
On the other hand, I think the EZ-Serial F/W released below is still v4.1 compliant.
https://www.cypress.com/documentation/software-and-drivers/ez-serial-ez-ble-module-firmware-platform
Are you planning to release EZ-Serial updated to v5.1?
If yes, please tell us the schedule.
Best regards,
Kenji Takahashi
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Kenji Takahashi-san,
The Ez-BLE modules that we are shipping at present supports BLE spec 4.2 features. Updating the Ez-serial firmware to BLE 5.1 in Ez-BLE modules is not possible because our Ez-BLE chip will have space issues (especially modules with 128 KB flash) and the chip does not support BLE 5.1 new feature.
Thanks
Ganesh
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Cypress is presently evaluating adding the BLE 4.2 features to the Ez-serial firmware. We will update once we have done the evaluation.
Thanks
Ganesh
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Kenji Takahashi-san,
The Ez-BLE modules that we are shipping at present supports BLE spec 4.2 features. Updating the Ez-serial firmware to BLE 5.1 in Ez-BLE modules is not possible because our Ez-BLE chip will have space issues (especially modules with 128 KB flash) and the chip does not support BLE 5.1 new feature.
Thanks
Ganesh