- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello
About CMG1 E-Marker
In the case of 5A charging, it is understood that SOP prime or SOP double prime packet is sent and confirmed after detecting Rp/Rd.
Q1-1)Is the content of the packet to be transmitted specified by the PD standard with a fixed value?
Q1-2)Or is it unique in combination with the terminal (charging side)?
(Q2)
They understand that E-Marker is not required on the adapter side when the adapter is a cable integrated type, even if it supports 5A.
On the terminal side (charged side), it is understood that there is no need to additionally install an E-Marker (special IC) even for 5A charging. Is this correct?
※ The terminal can respond by simply changing the FW for PD communication to transmit SOP prime or SOP double prime packets.
Best Regards
Arai
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
A1) Since Discover Identity is issued to SOP_PRIME, Discover Identity Responder ACK contains obviously different Data Obj.
A2) E-marking on Type-C Cables
For passive cable assembly, having E-marker IC at one end of the cable would be enough.
What does "the adapter is a cable integrated type" mean? Is it captive cable? Captive cable should be implemented E-marker if it supports more than 3A.
Best regards,
Hirotaka Takayama
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
A1) Since Discover Identity is issued to SOP_PRIME, Discover Identity Responder ACK contains obviously different Data Obj.
A2) E-marking on Type-C Cables
For passive cable assembly, having E-marker IC at one end of the cable would be enough.
What does "the adapter is a cable integrated type" mean? Is it captive cable? Captive cable should be implemented E-marker if it supports more than 3A.
Best regards,
Hirotaka Takayama
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Q1に関しまして質問内容及び回答頂きました内容から下記の様に理解しております。
Q1)E-Markerについて、追加ご教示ください。
5A充電する場合には、Rp/Rd検出後にSOPプライムorSOPダブルプライムのパケットを送信して確認するとの理解ですが、送信するパケットの内容はPD規格で固定値で規定されていますでしょうか? それとも、端末(被充電側)との組合せで固有で設定するものなのでしょうか?
上記に対して、回答としては PD規格で規定されているが、固定値ではない→理由として、Discover Identity Responder ACKに異なるデータオブジェクトが含まれる為。 という理解で正しいでしょうか?
Best Regards
Arai
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
はい。そうです。